Anhui Yongrui photoelectric Co., Ltd. shares several factors affecting the use o
Publishdate：2020-02-07 09:51 Views：
Anhui Yongrui photoelectric Co., Ltd. will share with you several factors affecting the use of color sorter. The color separator is a kind of non-destructive sorting equipment used for the quality detection and classification of bulk materials, which is widely used in grain, food, pigment chemical industry and other industries. It is difficult to separate recycled plastic sheets, plastic particles, corn, beans, rice, ore, pepper, pepper, garlic, melon seeds, raisins, seeds, traditional Chinese medicine, sea rice, shrimp skin, clove fish, glass and so on The separation effect of malignant impurities and special materials such as glass, metal and color bar is very significant, reaching the international leading level.
The ore color separator has been widely used in the separation and selection of the mining industry. Many mining enterprises have seen that their peers have achieved economic benefits by using the color separator, and found that they also need a color separator, but they can not meet the desired requirements in the actual production after purchase. Why? In the actual production process, these indicators are integrated and have mutual influence and restriction. They must be at the same time Investigate.
Considering the impurity content of raw materials
When there are few impurities, the interval between the two impurities is large and the reaction time left for the system is long. At this time, the speed of the conveyor belt can be increased and the output can be increased. Similarly, the higher the initial purity of raw materials is, the less the impurity quality is, the higher the color selection accuracy is, the less impurities are, and the effect is good.
Flexible adjustment of performance index
According to the requirements of color separation, different performance indexes are debugged. The lower the sensitivity, the better when the color separation effect can meet the requirements. If the sensitivity is increased too much, the solenoid valve will blow too much and enter the protection state, which may make the color selection effect worse.
Shading of color differences
The color sorter mainly selects materials according to the color difference of materials. Generally, there must be certain color difference between normal materials and defective materials in raw materials. The smaller the color difference, the greater the difficulty of color selection, the worse the performance index, and the different selection rate of materials with different colors.
Differentiation of raw materials
Different raw materials have different requirements for application, so when using the ore color separator, we must not only pursue the output of raw materials, but also consider the original materials, and select different color separation applications for different materials, so that the effect of color separation will achieve good results.
The above are several factors that affect the use of color sorter. If you want to know more about color sorter, please contact us.
The ore color separator has been widely used in the separation and selection of the mining industry. Many mining enterprises have seen that their peers have achieved economic benefits by using the color separator, and found that they also need a color separator, but they can not meet the desired requirements in the actual production after purchase. Why? In the actual production process, these indicators are integrated and have mutual influence and restriction. They must be at the same time Investigate.
Considering the impurity content of raw materials
When there are few impurities, the interval between the two impurities is large and the reaction time left for the system is long. At this time, the speed of the conveyor belt can be increased and the output can be increased. Similarly, the higher the initial purity of raw materials is, the less the impurity quality is, the higher the color selection accuracy is, the less impurities are, and the effect is good.
Flexible adjustment of performance index
According to the requirements of color separation, different performance indexes are debugged. The lower the sensitivity, the better when the color separation effect can meet the requirements. If the sensitivity is increased too much, the solenoid valve will blow too much and enter the protection state, which may make the color selection effect worse.
Shading of color differences
The color sorter mainly selects materials according to the color difference of materials. Generally, there must be certain color difference between normal materials and defective materials in raw materials. The smaller the color difference, the greater the difficulty of color selection, the worse the performance index, and the different selection rate of materials with different colors.
Differentiation of raw materials
Different raw materials have different requirements for application, so when using the ore color separator, we must not only pursue the output of raw materials, but also consider the original materials, and select different color separation applications for different materials, so that the effect of color separation will achieve good results.
The above are several factors that affect the use of color sorter. If you want to know more about color sorter, please contact us.
